![]() ![]() Case 3: If your device fails to flash from recovery mode, try manually switching the device to DFU mode.įollow the instructions below to enter DFU mode. Usually after ensuring that all is done perfect for things listed above, the success rate by repairing again is much higher. Please delete the previous downloaded firmware file and re-download the firmware file to repair operating system.Ĭase 2: If your device is still in black screen, apple logo, boot loop after repaired, please follow instructions above from number 2 to 6.Check that your network is working properly.Ensure that the power of the equipment is stable during the repair process.If you are using a laptop, it is recommended to connect the power cord to the laptop and charge it during the repair process. If you are using a desktop computer, it is recommended to connect the USB cable to the port on the back of the computer host.Please switch to a stable USB cable, preferably the original Apple USB cable.And please don't exit recovery mode, just go straight to repair system once you enter recovery mode.) (Because your device's recovery mode is abnormal, so you will need to re-enter the recovery mode again. ![]() ![]() Case 1: If our device is still in recovery mode after repairing, please proceed as follows.įollow the instructions to re-enter recovery mode. If you still fail to repair with latest version, then there may be an abnormality in your computer and device environment. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |